Skip to content

A free in-home estimate and code rules made plain: (562) 379-6735

La Habra Heights · Fullerton · Whittier · La Habra

(562) 379-6735

ServicesWindow Replacement

Window Replacement in La Habra Heights

We take out tired, drafty or fogged windows and set new ones that meet California's energy and safety rules. We handle the permit, use tempered glass where it is required and finish each opening carefully, so your home looks right and passes inspection.

Installer on a stepladder pressing a new white double-hung window into a cleared opening in a red brick wall, seen from below on an overcast day

Knowing when new windows make sense

Replacement earns its cost once the frame or the seals give out, not only the glass. Haze trapped between panes, sashes that bind or refuse to lock, and aluminum frames that bead with water on cold mornings all suggest a unit at the end of its useful life. New windows close those gaps, quiet the room and make your home easier to keep cool through a long, hot summer.

In California this is regulated work. Most jobs need a building permit, and new units have to meet Title 24 limits for heat gain and heat loss. Glass in certain spots, such as beside a door, over a tub or close to the floor, must be tempered. Bedroom windows have to keep a clear escape opening. We check each of these before anything is ordered, so nothing has to be torn out after the inspector visits.

If you are adding openings to a new addition, our window installation page covers that work. For swapping a failing slider, see sliding door replacement.

What our window replacement includes

Measuring every opening

We measure each window in several places, because older openings are rarely square. Accurate sizes are what let a new unit sit plumb without heavy shimming or gaps.

Product and glass selection

We walk you through frame materials, colors and glass packages, and point out which openings need tempered or low-E glass to meet code. You choose the look; we make sure it complies.

Permit and inspection

We file the paperwork with the city, schedule the inspection and are on hand to answer the inspector's questions. You do not have to make trips to the building counter.

Careful removal and installation

Old sashes and frames come out with attention to your stucco, drywall and trim. New units are set level, fastened to the framing and sealed against air and water.

Finish work and cleanup

We trim the interior, seal the exterior and haul away the old windows and debris. Floors and furnishings near each opening stay covered while we work.

Worker seen from behind writing on a clipboard beside a weathered sliding patio door on a wooden back deck, with a ladder, drill and caulk gun nearby

Signs your windows are due for replacement

Fog between the panes
When moisture shows up inside a dual-pane window, the edge seal has broken down. The insulating fill has escaped, and no amount of cleaning will clear the haze.
Single-pane aluminum frames
Many homes from the 1950s through the 1970s still have them. They pass heat freely, collect condensation and often have worn tracks and latches.
Sashes that stick or will not lock
Warped frames or worn hardware make a window hard to open and leave it unsecured. A bedroom window that will not open easily also fails as an escape route.
Drafts and dust on the sill
Fine dust along the sill, or curtains that move on a windy day, mean air is getting past the frame.
Fading floors and furniture
Older clear glass lets in a lot of ultraviolet light. Modern low-E coatings block much of it while keeping the view.

How a replacement job runs

  1. 1

    Free in-home estimate

    We visit, look at every window, take measurements and note what code asks of each opening. You hear your options plainly and are never pushed to commit.

  2. 2

    Line-by-line quote, then the order

    Your quote lists each window on its own line. Once you approve it, we place the order and submit the permit application to the city building department.

  3. 3

    Installation day

    Our crew removes, sets and seals one window before moving to the next, so no room sits exposed for long. Most rooms are back in order the same day their new window goes in.

  4. 4

    Inspection and walkthrough

    After the inspector signs off, we go through each window with you, check operation and locks, and show you how to care for the frames and glass.

What affects the cost of window replacement

Every home is priced on its own openings and the products you choose. We explain each line of the quote so you can see where the money goes and adjust if needed.

Size and number of windows
Larger units cost more to build and ship, and bigger orders spread setup time across more openings.
Frame material and style
Vinyl, fiberglass and specialty frames differ in price, as do sliders, casements and picture windows.
Glass requirements
Tempered glass, low-E coatings and laminated panes add cost, and some are required by code depending on where the window sits.
Installation method
A retrofit insert into the existing frame is less involved than a full-frame removal, which may need stucco or drywall patching. Our window retrofitting page explains the difference.
Access and condition
Second-story or hillside openings and any rot found in the framing can add time and materials.

Window replacement questions

Do I really need a permit to replace windows?
In most cases, yes. California treats window replacement as work that must meet energy and safety code, and the city checks it through an inspection. We file the paperwork and arrange that visit as part of the job.
Do you have a current offer on replacement windows?
We do: window replacement for only $495 per window with free installation (minimum purchase of 4 windows per order; some glass size and product restrictions apply). During your estimate we can go through your openings one by one and tell you which ones qualify.
Can you keep my existing frames?
Sometimes. If the old frame is sound and square, a retrofit insert can go inside it with less disturbance to stucco and trim. If the frame is bent, rotted or badly out of square, a full-frame replacement gives a better seal. We show you what we find and explain which approach suits each opening.
Will my new windows meet Title 24?
They will. We order units rated for California's energy standards and leave the labels on until inspection, since the inspector reads them.
How messy is the work inside my home?
Less than most people expect. We cover floors and nearby furniture, finish one window before starting the next and vacuum before we leave each room.

Start with a look at your windows

We measure, explain what code asks of each opening and hand you a clear quote. The in-home visit is free, and you are never pushed to sign.