Window Replacement in La Habra Heights, Built to Pass Inspection
We replace windows and sliding doors, install multi-folding doors and build custom glass railings for homeowners in La Habra Heights, Whittier and Brea. Each job starts with careful measuring and a clear answer on safety glass, egress and energy rules, so your new windows look right, open smoothly and meet code.
- Free in-home estimates
- Permits pulled for you
- No sales pressure
- Written line-item quotes

Windows, Doors and Glass for Your Home
We are CSLB C-17 licensed and bonded, and our work is insured for $2 million. Most of what we do is window replacement, from one tired bedroom window to every opening in the house, done as a retrofit or a full-frame installation depending on what your existing frames can support. We also handle sliding door replacement, multi-folding doors, energy efficient windows and custom glass railings. Each service page explains its own steps and what affects the price.

Window Replacement
Old or failing windows replaced with energy-compliant units, the paperwork handled and each opening sealed and finished cleanly inside and out.

Sliding Door Replacement
New sliding glass doors with tempered safety glass and a smooth-rolling sash, set square and sealed, with the inspection arranged for you.

Window Installation
New windows cut into existing walls, additions and conversions, framed to carry the load and brought through every required inspection.

Multi-Folding Doors
Folding glass door systems set into a properly framed, inspected opening, with tempered glass, a sill matched to your floor and panels that stack cleanly.

Window Retrofitting
Keep your stucco and interior walls intact while new, efficient windows go into the frames you already have, with code and inspection steps handled for you.

Energy Efficient Windows
Dual-pane, low-E windows chosen to meet California's energy code and installed so the rated performance actually reaches your rooms.

Custom Glass Railings
Frameless and post-mounted glass railings for decks, balconies and stairs, sized to guard code and installed with the inspection handled.
How We Work on Your Home
New windows count as a building alteration, and the rules behind them are simple once someone lays them out. We do that first, then install with the care we would want in our own homes.
Permits explained before you sign
We tell you whether your project needs city approval, what the inspector will check and how that shapes the schedule. Where the building department requires paperwork, we file it and meet the inspector on site.
Safety glass where code calls for it
Panes near doors, beside tubs and showers, and large panes close to the floor need tempered glass. We flag those openings during the estimate, so your quote already includes the right glass.
Bedroom openings that stay compliant
A new frame can shrink the clear opening of a bedroom window. We check net opening size and sill height before ordering, so an upgrade never leaves a room without a proper way out.
Careful finish work
Each unit is shimmed, leveled and sealed so it operates smoothly. Interior trim and the exterior stucco or siding edges are finished cleanly, drop cloths go down before any tools come out, and debris leaves with us every day.
A straight retrofit or full-frame answer
If your frames are sound, a retrofit saves the wall finish and time. If they are rotted or leaking, we say so and show you why.

About Our Company
We are a window and door company focused on two things you will notice for years: how the finished opening looks, and whether it was done to code. Clean caulk lines, square trim and sashes that glide matter to us as much as the paperwork.
California has firm rules for replacement windows, from Title 24 energy standards to safety glazing and bedroom egress. On hillside lots mapped for wildfire risk, the glass requirements can be stricter still. We read those rules for your house before we quote, so nothing catches you off guard at inspection.
- License
- CSLB C-17 licensed
- Insurance
- Bonded and insured; $2 million insurance coverage
How a Window Project Runs
Most jobs follow the same four steps, and you will know what comes next at each one.
- 1
Free in-home estimate
We measure every opening, check frame condition and note which windows need tempered glass or egress sizing. You get a written quote and a plain answer on whether the city needs to sign off.
- 2
Ordering and paperwork
Once you approve, your windows are built to the exact measurements, and we file with the building department where the work calls for it. You hear from us by phone with a realistic install date once the products are confirmed.
- 3
Installation day
Coverings go over the floors and nearby furnishings first. We take out each old window and set its replacement before moving on, level, sealed and flashed, so no room sits open overnight.
- 4
Inspection and walkthrough
Where the city requires a final inspection, we schedule it and are there when the inspector arrives. Then we show you how every lock and sash works and leave the rooms clean.
What Shapes the Price of New Windows
We price each project after seeing it, because no two openings are quite alike. These are the details that move the number. We explain each one during the visit, not after the order is placed.
Your estimate is free, written line by line and given at your home with no pressure to sign. The figure on it is the figure we work to unless hidden damage turns up and you approve the change.
- Size and number of openings
- Larger units and oversized picture windows cost more in glass and labor. Replacing several windows in one project spreads setup costs more efficiently.
- Retrofit or full-frame
- A retrofit sets the new window inside the existing frame and leaves the wall finish alone. Full-frame work takes the opening back to the rough framing, which adds stucco or siding patching but lets us correct damage and flashing.
- Glass package and frame material
- Dual-pane low-E glass, tempered panes where required and laminated glass for sound each change the cost. Vinyl, fiberglass and aluminum frames differ in price, finish choices and how they hold up in summer heat.
- Condition behind the old frame
- Rotted sills or water damage only show once the old unit comes out. If we find something, we stop, show you photos and explain the fix before any added cost.
- Permits and access
- City fees and inspection time are part of the job where they apply. Second-story windows and hillside lots with tight access can take extra equipment or hands.
Questions Homeowners Ask Us
- Do I need a permit to replace my windows?
- In most California cities, yes. Replacing windows is usually treated as an alteration that needs city approval, and the new units must meet current energy and safety rules. Requirements vary by city and by the scope of the work. We confirm what applies at your address during the estimate, and where one is needed we pull it and handle the inspection.
- What is Title 24 and how does it affect my windows?
- Title 24 is California's energy code. It limits how much heat a replacement window lets through and how much solar heat the glass admits. The energy efficient windows we install are rated to meet it, and the rating labels stay on the glass until the inspector has seen them.
- What is the difference between retrofit and full-frame replacement?
- A retrofit window fits inside your existing frame, so the stucco and trim around it stay in place and the job goes faster. Full-frame replacement takes the opening back to the studs, which is the right call when the old frame is damaged or leaking. We look at your frames and tell you honestly which one your home needs.
- Will new windows make my bedroom openings smaller?
- They can if the wrong style or frame is chosen. Code requires each bedroom window to keep a minimum clear opening so people can get out in a fire. We measure every bedroom window and choose units that keep that opening large enough.
- Which frame material should I choose?
- Vinyl is a strong value and needs little upkeep. Fiberglass holds its shape well in heat and takes paint, and aluminum suits narrow sightlines on modern homes. During the visit we hold actual frame corners and color chips up to your existing openings, so you judge each finish in your own light before you decide.
- What warranty comes with the windows?
- Our windows carry a lifetime warranty, and it includes accidental glass breakage. We go over what it covers when we review your quote, so you know what to expect long after installation.
- Will you beat another company's estimate?
- Yes. Show us a written estimate from a contractor holding a state license, or from a supplier of USA-made windows, and we will price below it. We go through the competing quote with you item by item during your free in-home visit, so you are comparing the same glass and scope.
- How disruptive is installation day?
- We finish each opening before starting the next, so most of the house stays usable. The area around each window is covered, old units are hauled off, and the work area is cleaned before we leave.
Where We Install
We work throughout La Habra Heights and nearby communities, including Whittier, La Habra, Fullerton, Brea and Hacienda Heights. We also install in South Whittier, Rowland Heights, La Mirada, La Puente and Valinda. Each city runs its own building department, and we file with whichever one covers your address.
- La Habra Heights
- Fullerton
- Whittier
- La Habra
- South Whittier
- Hacienda Heights
- Brea
- Rowland Heights
- La Mirada
- La Puente
- Valinda
Not sure whether your home is in our area? Ask when you phone and we will tell you right away.

See Your Options at Home
We will measure your windows, explain what code asks of each opening and leave you a written quote to consider at your own pace.